What is a double-decker exhibition stand?

A double-decker is a two-storey booth that places a second usable level above the ground floor. The lower level holds product, demos and traffic, while the upper deck is used for private meetings, a VIP lounge or hospitality. It gives roughly 1.5x to 2x the usable area on the same footprint, which is why brands choose it when island space is limited or expensive.

What is the minimum size for a two-storey stand?

Double-deckers generally start from around 36 square metres of island or peninsula floor. Below that, a staircase and structural frame consume too much of the ground level to be worthwhile. The other deciding factor is the hall clearance height, which must allow a second level plus headroom. We confirm both before any design begins.

Do double-decker stands need structural approval?

Yes. Two-storey stands require stamped structural calculations and, at venues such as DWTC, an independent engineer’s certificate plus Civil Defence sign-off, submitted before a deadline ahead of build-up. SOL Dubai prepares the full approval pack and lodges it on your behalf, so approval is secured before fabrication is committed.

How much does a double-decker stand cost?

A two-storey build in Dubai typically starts from AED 3,200 per square metre. It sits at the premium tier because of the engineering, the staircase and the upper deck. The final figure depends on deck area, glass and balustrade, the staircase design and the level of AV and hospitality fit-out. We provide a fixed, itemised quote once we have your plot size and brief.

How long does a two-storey stand take to build?

Plan for a longer lead time than a single-level stand, because engineering and approval gate the schedule. We recommend confirming a double-decker at least 8 to 10 weeks before your show, which allows time for calculations, the approval submission, fabrication and trial assembly. Larger flagship builds benefit from more lead time again.

Is a double-decker stand safe for visitors?

Yes, when properly engineered. Every two-storey stand is backed by stamped calculations for deck, staircase and floor loads and signed off by an independent engineer on site before doors open. Anti-slip treads, code-height balustrades, fire-safe materials and clear evacuation routes are designed in from the start.

Can you reuse or store a double-decker between shows?

Yes. We design the frame, deck and key elements to be dismantled, stored and rebuilt for a future edition, often reconfigured to a different plot size. We dismantle and remove the stand after the show and offer storage between events, spreading the investment across several appearances.

Do you build double-deckers outside Dubai?

Yes. We deliver two-storey stands across the GCC, including Abu Dhabi, Sharjah, Riyadh, Jeddah, Doha and Muscat, and handle the structural approval requirements of each venue. Our Dubai workshop builds and trial-assembles the structure before it travels, so it is proven to fit before it reaches the floor.

double-decker-exhibition-stands

Two-Storey · Engineered · Certified

Twice the floor on the same footprint

A double-decker exhibition stand — also called a two-storey or double-deck booth — turns a fixed floor footprint into two usable levels. Where prime island space at Dubai World Trade Centre, ADNEC and Dubai Exhibition Centre is limited and priced at a premium, building upward is often the most rational way to add meeting rooms, hospitality and storage without paying for a larger plot.

The ground level stays open for product, live demos and visitor traffic, while the upper deck hosts private meetings, a VIP lounge or hospitality away from the noise. On the same footprint you gain roughly 1.5x to 2x the usable area, and a raised deck reads as a landmark — visible from across a busy hall and lifting your brand above the sightline of every single-level booth around it.

SOL Dubai designs, engineers and builds two-storey stands across the UAE and the wider GCC. We run our own Dubai fabrication workshop, so the structural frame, staircase and upper deck are built and trial-assembled under our roof before anything ships to the show floor. Structural calculations, venue approval submissions and on-site supervision are all handled by our own team, not passed to a third party.

That single point of ownership matters most on a two-storey build, because engineering and venue approval gate everything that follows. The stand that goes up is the stand that was certified — no surprises during build-up, and no gap between the concept you signed off and the structure that reaches the hall.

Double-Decker Exhibition Stands in Dubai

Twice the floor on the same footprint

What a double-decker stand includes

Open ground floor

Upper deck

Engineered staircase

Glass balustrades

Under-stair storage

Feature lighting & branding

How we design and build your two-storey stand

When a double-decker is the right call

Two-storey stands in the field

Real briefs. Real results.

A two-storey stand that hosted the deals

Getting a double-decker right

Check hall height first

Design the staircase early

Engineer before you decorate

Plan upstairs around meetings

Two-storey stands across the UAE & GCC

Pricing — all-inclusive

Double-decker exhibition stand questions

Get your double-decker stand quote in 48 hours