Skip to content
Home › Shows › Healthcare › AccessAbilities Expo 2027
Dubai · DWTCHealthcare

AccessAbilities Expo 2027 Exhibition Stand Design & Build (DWTC)

Full-service custom stands for AccessAbilities Expo 2027 at Dubai World Trade Centre — accessible design, in-house build, the DWTC Permit to Build and H&S paperwork, install and on-stand support. Built so every visitor can reach, see and use what you show.

Custom exhibition stand designed and built by SOL Dubai at Dubai World Trade Centre
★From AED 950 / sqmStarting price★Dubai World Trade CentreVenue★2027 — dates TBCNext edition★HealthcareAudience★TBCDuration★48 hoursQuote turnaround★From AED 950 / sqmStarting price★Dubai World Trade CentreVenue★2027 — dates TBCNext edition★HealthcareAudience★TBCDuration★48 hoursQuote turnaround

AccessAbilities Expo 2027 at a glance

AccessAbilities Expo presents itself as the region’s largest dedicated exhibition for People of Determination across the Middle East, North Africa and South Asia. It is held at the Dubai World Trade Centre (DWTC) under the patronage of His Highness Sheikh Ahmed bin Saeed Al Maktoum. The 8th edition took place on 19–21 October 2026 in Za’abeel Halls 4–6. This page covers the 2027 edition, whose dates have not yet been announced; we will update it when the organiser confirms them.

Exhibitors range from assistive-technology and medical-rehabilitation companies to government bodies, education providers and accessible-services firms. The show covers government and non-government organisations, education, training and employment, digital solutions, assistive technology and daily-living aids, home, architecture and construction, healthcare and rehabilitation, leisure and sport, accessible services, financial and professional services, and media and awareness. There are dedicated areas for disability sports, arts, youth empowerment, workplace inclusion, and robotics and medical rehabilitation.

The 7th edition in 2025 brought together around 270 companies, brands and specialised centres and around 17,000 visitors, according to the organiser’s post-show release. As a Dubai-based stand builder, SOL Dubai works at DWTC as our home venue.

Who visits AccessAbilities Expo

The audience is unlike most trade shows. Visitors include People of Determination and their families, carers, rehabilitation and healthcare professionals, educators, government entities, employers and buyers of assistive technology. Many visitors use wheelchairs, walking aids or mobility scooters; some are blind or have low vision; some are Deaf or hard of hearing; some are autistic or have sensory or cognitive needs. The programme reflects this, with the Knowledge Hub, the Incluzun Summit, Determination Without Limits, the International Deaf Forum, the ABA Pathways Conference and a Hosted Buyers and Business Matchmaking programme.

For an exhibitor, the consequence is simple: a stand that is not accessible fails at the one thing this show is about. Visitors will notice a step, a high counter or a cramped layout immediately, and so will the professionals and government buyers who walk the hall with them.

Designing an accessible stand

Accessibility starts with the floor. Most custom stands sit on a raised platform to hide cables, but a platform edge is a barrier for wheelchair users and a trip hazard for people with low vision. For this show we either build the stand at floor level with cables routed in low, flush covers, or use a very low platform with a gentle ramp along the full open side rather than a single narrow ramp in one corner. Edges are marked in a contrasting colour.

Inside the stand, we plan clear, wide routes and turning space so a wheelchair or scooter user can move around and leave without reversing. Counters include a lowered section with knee clearance, so conversations happen face to face. Products are displayed within reach from a seated position as well as standing. Seating with arms is provided for visitors who need to rest. Where you have private consultation space, its door and interior are sized for a wheelchair and a companion.

Graphics, sound and sensory comfort

Graphics should be readable by as many people as possible: large, high-contrast type, plain language, and key information placed at a height that can be read from a wheelchair. Where appropriate, we can add tactile or Braille labels to product displays. Videos should be captioned, and if your team includes a sign-language interpreter, the stand needs a well-lit spot where they can be seen clearly.

Sound and light need restraint. Loud audio and flashing or strobing light can be distressing or unsafe for some visitors, so we avoid them and use steady, even lighting without glare. A small quiet corner with softer light and seating gives visitors with sensory needs, and their families, a place to pause and talk. These details are inexpensive when designed in from the start and difficult to add on site.

Showing assistive technology and rehabilitation equipment

Many exhibitors bring equipment visitors want to try: wheelchairs and mobility devices, communication aids, smart glasses, prosthetics, rehabilitation robots, accessible vehicles or home-adaptation products. A trial needs space. We plan a clear, level try-out zone with room to turn and manoeuvre, sturdy surfaces, and support rails where visitors are testing walking or standing aids. Heavy or large items are checked against DWTC floor-loading limits and scheduled into build-up.

Devices that need charging or live connection need power and data points at the right places, ordered in advance through DWTC’s official electrical contractor. Staff on the stand should be ready to demonstrate in more than one way — spoken, written and visual — so every visitor can understand what the product does. A short briefing for your stand team on accessible communication before the show opens is time well spent.

Our AccessAbilities Expo stand build process

Every Dubai project runs through our eight-stage process, handled start to finish in-house:

  1. Discovery and brief — we agree what you will show and demonstrate, your accessibility priorities, meeting needs and budget, and confirm the stand number and dimensions once the 2027 floor plan is issued.
  2. Concept and 3D design — photorealistic visuals and a floor plan showing step-free access, circulation routes, try-out zones and meeting space.
  3. Costing and approval — a fixed, fully itemised quotation covering structure, displays, power, AV and logistics.
  4. Venue approvals and technical drawings — structural and electrical submissions prepared for DWTC approval.
  5. Fabrication — walls, counters, display units, joinery and graphics built and quality-checked in our own workshop.
  6. Pre-build and QA — trial assembly, including a check of routes, counter heights and reach ranges, before build-up.
  7. On-site installation — supervised build at DWTC during official build-up, handed over show-ready.
  8. Show-day support and dismantling — standby team on call, then careful dismantling and return or storage of your equipment.

Planning and lead times

The concept, budget and equipment list can be agreed before the organiser publishes the build-up timetable; approvals and the build schedule are then fixed against it. For a custom stand at DWTC we recommend starting 8–14 weeks before the show, and earlier for a double-decker, because structural approval and the Permit to Build come before any building starts.

The steps are the same for every show. We agree the brief and budget, then send 3D concepts and a costed quote. Once the design is approved we prepare the structural drawings and submit them to the organiser and DWTC for approval. Fabrication runs in our workshop alongside that approval, so the stand is built and checked before move-in. On site we handle the build, power and furniture, stay on call through the open days, and take everything down and clear the space at the end.

Stand options and pricing

We build every AccessAbilities Expo format. Modular stands, from AED 950 per square metre, suit specialised centres and smaller organisations that need clean branding, information and a meeting point. Custom stands start from AED 1,650 per square metre and give you a bespoke, fully accessible layout with try-out zones and consultation space. Premium builds start from AED 2,400 per square metre, and double-decker and pavilion builds from AED 3,200 per square metre. For this show we usually advise against a double-decker unless the upper floor has step-free access, because an upstairs meeting room that some visitors cannot reach works against your message.

The final figure depends on stand size, equipment, try-out space, meeting areas, AV and finishes. Every quotation is fixed and itemised, so the price you approve is the price you pay.

Why exhibitors choose SOL Dubai

We are a Dubai-based exhibition stand builder with our own workshop in Al Quoz, working at DWTC as our home venue. We handle AccessAbilities Expo stands start to finish: design, fabrication, venue approvals and on-site installation, with accessibility checked at every stage. Clients get workshop-built quality, a single accountable team and a price that holds from quotation to final invoice.

Building at Dubai World Trade Centre: the rules that shape your AccessAbilities Expo 2027 stand

AccessAbilities Expo 2027 is governed by the Dubai World Trade Centre’s own technical regulations. Get them right and your stand goes up cleanly; miss a submission and you lose build time, not just money. We design to all of this from the first sketch and file the paperwork for you.

Permit to Build

Every stand needs a DWTC Stand Permit to Build (PTB) before construction. We prepare and submit it so your build is cleared to start on day one of build-up.

Height & “complex” structures

Standard custom builds work to around 4m. Taller builds and anything DWTC classes as complex — double-deckers, long spans, or stands where the travel distance to an exit exceeds 10m — trigger structural-engineer clearance through DWTC’s Organiser+ portal before the Permit to Build is released, and the engineer can halt an unsafe build on site.

Double-deckers

A two-storey stand needs certified structural calculations, a Double-Deck health-and-safety declaration, a displayed maximum-occupancy figure and code-compliant staircases — at least 1m wide with handrails, and a second staircase once an upper deck passes ~200 sqm or sits over 25m from the stairs.

Electrical power

All mains power is supplied by DWTC’s official Electrical Contractor and ordered in advance — you can’t self-wire mains. We design the scheme and order it, including 24-hour power where your stand needs it.

Rigging & suspended elements

Banners and lighting rigs hung from the hall are subject to DWTC approval and load limits and ordered ahead of tenancy. We prepare and file the rigging submission on time.

Fixings & fire-safe materials

Nothing may be fixed to the floors, walls, ceilings or structural steel, and all materials must be fire-retardant — Perspex is prohibited (Lexan and Macralon are accepted). We complete and inspect finishes in our workshop, so the on-site crew assembles an approved build.

Accreditation & deadlines

Every contractor needs a DWTC Contractor+ digital badge and PPE is mandatory. Structural, rigging and electrical submissions run weeks ahead of build-up, and late orders attract surcharges — we manage the badges and the deadlines.

Recent Builds

Recent builds from our workshop

Real stands designed and built by our in-house team. Every stand is pre-built and inspected before it ships to Dubai World Trade Centre.

SOL Dubai custom stand, built in our Dubai workshop
Custom stand · SOL Dubai
SOL Dubai island stand, built in our Dubai workshop
Island stand · SOL Dubai
SOL Dubai double-decker, built in our Dubai workshop
Double-decker · SOL Dubai
SOL Dubai feature-lit, built in our Dubai workshop
Feature-lit · SOL Dubai
SOL Dubai bespoke build, built in our Dubai workshop
Bespoke build · SOL Dubai
SOL Dubai country pavilion, built in our Dubai workshop
Country pavilion · SOL Dubai
View our full portfolio
Transparent Pricing

AccessAbilities Expo 2027 stand pricing — all-inclusive

One quote covers design, in-house build, graphics, delivery, install, dismantle and venue paperwork — fixed and itemised, with a free 3D concept before you commit.

Modular
9–18 sqm
From
AED 950 / sqm
Best for: first-time and value-focused exhibitors
  • Reusable system structure
  • Custom-printed graphics
  • LED lighting & furniture
  • Delivery, install & dismantle
  • Venue paperwork handled
Get a quote
Premium
50–100 sqm
From
AED 2,400 / sqm
Best for: large, high-impact stands with demo space
  • Everything in Custom, plus:
  • Large-scale custom build
  • Double-height feature elements
  • Full AV & feature lighting
  • Demo / hospitality area
  • Priority in-house build slot
Get a quote
Double-Decker / Pavilion
100+ sqm
From
AED 3,200 / sqm
Best for: flagship presence and country pavilions
  • Everything in Premium, plus:
  • Two-storey engineered build
  • VIP lounge & meeting rooms
  • Certified structural sign-off
  • Country-pavilion capable to 1,500 sqm
Get a quote

Not included: venue space rental (paid to the organiser), and venue electrical & rigging orders (we place these at the advance rate on your behalf and bill at cost). Bespoke add-ons are quoted line by line, so the number you sign is the number you pay.

Case Studies

Real briefs. Real results.

See how brands turn raw floor space into a working show presence — every project handed over to a documented client sign-off.

Explore all case studies →
Field Notes

Build notes for Dubai World Trade Centre

The detail that isn’t in the exhibitor manual — from the people who build here.

CD
Carlos Dalè
General Manager, SOL Dubai · oversees stand design and build to venue rules across Dubai, Abu Dhabi and Riyadh
01

Permit to Build gates everything — file the structural calcs early

At DWTC nothing gets built without a Permit to Build, and for any complex or double-deck stand that permit depends on structural calculations clearing the DWTC engineer. We submit on Organiser+ the week the design is signed off — a late structural file, not the build, is what most often delays a stand.

02

Mains power is DWTC’s to supply — order it, don’t wire it

All mains electrical comes from DWTC’s official contractor and is ordered in advance. We book power — including 24-hour supply where a stand needs it — at the advance rate so nothing is sitting dead on opening morning.

03

Finish in the workshop — Perspex won’t pass

Only fire-retardant materials are allowed and Perspex is specifically prohibited (we use Lexan or Macralon). We complete and inspect every finish at our workshop, so the on-site crew assembles an approved build instead of fabricating in the hall.

04

Lock the slot early

DWTC’s calendar is packed, so build-up slots, rigging and power book out and late orders cost more. We secure your space-only window and order services at the advance rate.

Common mistakes, in order of frequency

  1. An oversized logo on the back wall that crowds out the one-line proposition a buyer reads in three seconds.
  2. The same graphic on the front and side panels of an inline stand — the aisle-facing side panel is your most wasted surface.
  3. A counter or sign at the very front that blocks the sightline into the stand and stops buyers stepping in.
  4. Under-ordering power — no 24-hour supply for fridges, screens or live demos, so the stand isn’t ready on opening morning.
  5. Leaving structural, rigging and electrical orders until after the venue deadlines and paying avoidable surcharges.
FAQ

AccessAbilities Expo 2027 stand questions, answered

Real answers with real numbers — including the venue’s build rules. Click any question to expand.

When and where is AccessAbilities Expo 2027?
The 2027 dates have not been announced yet. The 8th edition took place on 19–21 October 2026 in Za’abeel Halls 4–6 at the Dubai World Trade Centre (DWTC). We will update this page when the 2027 dates are confirmed.
How big is AccessAbilities Expo?
According to the organiser’s post-show release, the 7th edition in 2025 brought together around 270 companies, brands and specialised centres and around 17,000 visitors.
How much does an AccessAbilities Expo stand cost?
A full-service AccessAbilities Expo stand starts from AED 950/sqm for a modular build, AED 1,650/sqm for a bespoke custom stand, AED 2,400/sqm for large premium builds and AED 3,200/sqm for double-decker and pavilion builds. Prices are approximate starting points; every quote is fixed and itemised with a free 3D concept.
How far ahead should we book a stand for AccessAbilities Expo?
We recommend starting 8–14 weeks before the show for a custom stand, and earlier for a double-decker or pavilion, because the venue’s structural approval and permits come first. A modular stand with custom graphics needs less lead time. Send us your hall and stand size and we will set out a timeline that fits your dates.
Can the stand be fully step-free?
Yes. We build at floor level with flush cable covers, or use a very low platform with a gentle ramp along the open side, with edges marked in a contrasting colour.
How do you make counters and displays usable from a wheelchair?
Counters include a lowered section with knee clearance, products are placed within seated reach, and routes through the stand leave room to turn without reversing.
Can you make graphics and videos accessible?
Yes. We use large, high-contrast type and plain language, place key information at a readable height from a wheelchair, add tactile or Braille labels where appropriate, and caption videos.
Can visitors try our mobility or rehabilitation equipment on the stand?
Yes. We plan a level try-out zone with room to manoeuvre, sturdy surfaces and support rails where needed, and check heavy items against DWTC floor-loading limits.
Who handles the Dubai World Trade Centre permits and approvals?
We do, start to finish. Every stand at DWTC needs a Stand Permit to Build, and complex or double-deck stands need structural calculations cleared by the DWTC engineer first. We prepare the drawings, submit them and manage the approval.
How is power ordered for charging and demonstrations?
Mains power at DWTC is supplied by the venue’s official electrical contractor and ordered in advance. We work out the load for your devices, lighting and screens and place the order at the advance rate.
Do you build double-decker stands at AccessAbilities Expo?
We can, with certified structural calculations, a displayed maximum-occupancy figure and code-compliant staircases. For this show we usually advise against one unless the upper floor has step-free access, so that every visitor can reach every part of your stand.
What’s included in a full-service AccessAbilities Expo stand?
Custom 3D design, in-house fabrication and pre-build, full graphics, delivery to Dubai World Trade Centre, install and dismantle, the DWTC Permit to Build and H&S paperwork, electrical and rigging ordered on your behalf, and a dedicated project manager. Venue space rental is paid to the organiser and is not included.
Do you provide on-site support during the show?
Yes. Our team is on call across every show day for anything from a graphic touch-up to an electrical fix, and larger stands get a dedicated on-site project lead.
What happens to the stand after the show?
We dismantle and clear the space, return your equipment or hand it to your logistics agent, and can store reusable stand elements for your next edition so you are not paying to rebuild from scratch.
More Shows

More healthcare shows we build for

Other shows our in-house team designs and builds for, with the same full-service service and full venue handling.

See the full show calendar

Get your AccessAbilities Expo 2027 stand quote in 48 hours

Custom 3D rendering and all-inclusive pricing, designed to Dubai World Trade Centre’s rules with structural sign-off built into the timeline. We build in-house and install on site — the stand you approve in the rendering is the stand that opens.

Request a free quote
Live now