DIHAD 2027 at a glance
DIHAD — the Dubai International Humanitarian Aid & Development Conference & Exhibition — has been held in Dubai since 2004 under the patronage of His Highness Sheikh Mohammed bin Rashid Al Maktoum. It is organised by the DIHAD Sustainable Organisation with INDEX Conferences & Exhibitions, and bills itself as the world’s leading event on humanitarian aid and development. The 2027 edition takes place from 4 to 6 May 2027 at the Dubai World Trade Centre (DWTC).
The event has two halves. The conference addresses humanitarian issues and solutions; the exhibition showcases technologies, products and services for humanitarian operations, from relief supplies and emergency-response equipment to disaster management, search and rescue, and development solutions, with pavilions for countries and international organisations. Across its first 22 editions, DIHAD reports 184,744 attendees from 195 countries and 11,061 participating organisations.
The International Emergency and Catastrophe Management (IECM) Conference & Exhibition is held alongside DIHAD every year, and the week also includes the First Aid World Cup with the IFRC, the Humanthropy Awards and the Global Education Summit for Development. As a Dubai-based stand builder, SOL Dubai works at DWTC as our home venue.
Who exhibits and who visits
DIHAD brings together governments, UN agencies, Red Cross and Red Crescent societies, NGOs, the private sector, academia and humanitarian professionals. Visitors are decision-makers, policymakers, practitioners, innovators and frontline responders, and the event is for registered professionals and delegates only. That mix is unusual: on the same aisle you may find a national aid agency, a UN body, a manufacturer of relief shelters and a technology firm offering mapping or logistics software.
Each of these needs a different kind of stand. Agencies and NGOs are there to explain their work, build partnerships and meet donors and governments. Suppliers are there to show equipment to procurement teams who buy at scale and need proof that a product works in the field. A good DIHAD stand understands which of those jobs it is doing, and is designed around it.
Getting the tone right
DIHAD is not a consumer show, and a stand that feels like a sales pitch can sit badly next to organisations talking about crisis response. For agencies and NGOs, the stand should communicate seriousness and credibility: clear statements of mission and reach, real photography from the field used with care and consent, and a calm space where partners and donors can talk. Bright, loud design usually works against this audience.
For suppliers, the same principle applies in a different way. Buyers from aid organisations want facts: specifications, deployment times, packing volumes, certifications and evidence of use in real operations. Graphics should be short and technical, and product information should be easy to photograph or take away. A screen with field footage of the product in use is often more persuasive than any slogan.
The conference also shapes traffic. If someone from your organisation is speaking, the stand becomes the natural place for follow-up conversations, so it helps to have a printed or on-screen summary of the talk, a named contact and a quiet corner to continue the discussion. We plan the meeting area with this in mind, rather than filling every square metre with display.
Showing relief and emergency equipment
Many DIHAD exhibitors show physical equipment: shelters and tents, water treatment units, medical and first-aid kits, emergency lighting and power, rescue tools, drones or vehicles. Large items need planning. We confirm the dimensions and weight of every item at the design stage, check DWTC floor-loading limits, and schedule delivery of large pieces into the build-up timetable before the stand walls go up around them.
Where a product is best understood by seeing it set up — a deployed shelter, a working water unit or a kit unpacked next to its transport case — we design the stand around that demonstration and leave room for visitors to walk round it. Anything that needs power or water for a live demonstration is ordered through the venue in advance. For equipment that cannot travel, we build accurate display mock-ups and use screens to show it in use.
Our DIHAD stand build process
Every Dubai project runs through our eight-stage process, handled start to finish in-house:
- Discovery and brief — we agree your message, the equipment you will show, its sizes and weights, meeting needs and budget, and confirm hall, stand number and dimensions at DWTC.
- Concept and 3D design — photorealistic visuals and a floor plan balancing display space, information and meeting areas.
- Costing and approval — a fixed, fully itemised quotation covering structure, displays, power, AV and logistics.
- Venue approvals and technical drawings — structural, electrical and floor-loading submissions prepared for DWTC approval.
- Fabrication — walls, display structures, joinery and graphics built and quality-checked in our own workshop.
- Pre-build and QA — trial assembly with displays fitted, so fixings and finishes are proven before build-up.
- On-site installation — supervised build at DWTC during official build-up, handed over show-ready.
- Show-day support and dismantling — standby team on call, then careful dismantling and return or storage of your equipment.
Pavilions, delegations and the IECM exhibition
Country and international-organisation pavilions are a feature of DIHAD. A pavilion has to present one clear identity from the aisle while giving each partner organisation inside it its own space, information and a place to meet. We design pavilions as one structure with a shared visual language and fit out each unit to the same standard. Our country pavilion design work covers this kind of multi-partner build.
A private meeting room, a small hospitality area and space for a short presentation all help. If your organisation also exhibits at IECM, held alongside DIHAD, we can design and build both stands as one project with consistent branding, one set of approvals and one team on site.
Booking lead times
For a custom stand at DWTC we recommend starting 8–14 weeks before the show, and earlier for a double-decker or a large pavilion, because the venue’s technical approval and permits come before any building starts. A modular stand with custom graphics needs less lead time. Send us your hall, stand size and show dates and we will set out a build timeline that fits them.
The steps are the same for every show. We agree the brief and budget, then send 3D concepts and a costed quote. Once the design is approved we prepare the structural drawings and submit them to the organiser and DWTC for approval. Fabrication runs in our workshop alongside that approval, so the stand is built and checked before move-in. On site we handle the build, power and furniture, stay on call through the open days, and take everything down and clear the space at the end.
Stand options and pricing
We build every DIHAD format. Modular stands, from AED 950 per square metre, suit smaller NGOs and first-time exhibitors who need clean branding, information panels and a meeting point. Custom stands start from AED 1,650 per square metre and give you a bespoke layout with equipment displays, screens and meeting space. Premium builds start from AED 2,400 per square metre, and double-decker and pavilion builds from AED 3,200 per square metre.
The final figure depends on stand size, the amount and weight of equipment, meeting and hospitality space, AV and branding. Every quotation is fixed and itemised, so the price you approve is the price you pay — which matters for organisations working to fixed budgets.
Why humanitarian organisations choose SOL Dubai
We are a Dubai-based exhibition stand builder with our own workshop in Al Quoz, working at DWTC as our home venue. We handle DIHAD stands start to finish: design, fabrication, venue approvals, equipment logistics and on-site installation. Clients get workshop-built quality, a single accountable team and a price that holds from quotation to final invoice.








