Skip to content
Home › Shows › Healthcare › DUPHAT 2027
Dubai · DWTCHealthcare

DUPHAT 2027 Exhibition Stand Design & Build (DWTC)

Full-service custom stands for DUPHAT 2027 at Dubai World Trade Centre — design, in-house build, the DWTC Permit to Build and H&S paperwork, install and on-stand support. Built for pharma brands meeting distributors, pharmacy chains and buyers.

Custom exhibition stand designed and built by SOL Dubai at Dubai World Trade Centre
★From AED 950 / sqmStarting price★Dubai World Trade CentreVenue★30 Mar–1 Apr 2027Next edition★HealthcareAudience★3 daysDuration★48 hoursQuote turnaround★From AED 950 / sqmStarting price★Dubai World Trade CentreVenue★30 Mar–1 Apr 2027Next edition★HealthcareAudience★3 daysDuration★48 hoursQuote turnaround

DUPHAT 2027 at a glance

DUPHAT — the Dubai International Pharmaceuticals and Technologies Conference & Exhibition — unites the pharmaceutical value chain across the Middle East and Africa. Manufacturers, distributors, pharmacy chains, buyers and regulators meet there to source products and explore opportunities. It is organised by INDEX Conferences & Exhibitions and returns to the Dubai World Trade Centre (DWTC) for its 32nd edition from 30 March to 1 April 2027.

The 2026 edition, the 31st, was held in August rather than its usual spring slot, and 2027 brings it back to the spring. According to the organiser and WAM, the 2026 edition had more than 1,100 exhibiting pharma brands and companies and more than 25,000 visitors and participants from 85 countries, and it closed with approximately AED 10.3 billion in direct and indirect deals.

The exhibition is organised into zones: Pharma for global pharmaceutical brands, VitaShow for vitamins, supplements and nutraceuticals, DUPHAT Tech for pharmaceutical manufacturing machinery, Parapharma for OTC and wellness products, and a Startup zone. Alongside it run a scientific conference, workshops and poster presentations. As a Dubai-based stand builder, SOL Dubai works at DWTC as our home venue.

Who visits and what they come for

DUPHAT is a trade-only event. The visitors are pharmaceutical manufacturers, distributors, pharmacy chains, buyers, pharmacists and regulators. Many come with a clear commercial purpose: a distributor looking for new product lines for a regional market, a pharmacy chain reviewing OTC and wellness ranges, or a manufacturer looking at packaging and production equipment. The Pharma Business Hub adds pre-arranged B2B meetings, and the Pharma Leadership Forum, held with the Emirates Drug Establishment and the Dubai Health Authority, brings senior regulators and industry leaders into the same week.

For an exhibitor, that means most valuable conversations are meetings, not passing visits. Your stand has to work as a professional meeting venue first, with a clear product presence at the front to catch new contacts from the aisle.

What a pharma stand has to do

A DUPHAT stand has three jobs. The first is to show your portfolio clearly: product families arranged so a buyer can see your therapeutic areas or ranges at a glance, with packs displayed at eye level and well lit. The second is to support the conversation that follows, with room for distributor and licensing discussions that cover registration status, markets and supply terms. The third is to give a credible, regulated impression: clean design, accurate information and nothing that looks improvised.

Messaging needs care. Pharmaceutical promotion is regulated, so stand graphics should stick to approved claims and product information, and we recommend your regulatory or medical team signs off all wording before it goes to print. We build that sign-off step into the schedule, so graphics are not rushed through at the last minute.

Meeting rooms and private space

Because so much of the business at DUPHAT happens in meetings, private space is often the most important part of a larger stand. We design closed or semi-closed meeting rooms with good acoustics, a table that seats four to six, a screen for presentations and storage for samples and documents. Glass partitions with frosted graphics give privacy while keeping the stand open-looking from the aisle.

A reception counter at the front lets one person greet visitors, check pre-booked meetings and qualify walk-ups, while colleagues hold discussions inside. A small storeroom keeps literature, samples and personal items out of sight. On busy days, a hospitality corner with coffee and water keeps visitors comfortable when meetings run long.

Our DUPHAT stand build process

Every Dubai project runs through our eight-stage process, handled start to finish in-house:

  1. Discovery and brief — we agree your product ranges, meeting needs, any machinery for DUPHAT Tech and your budget, and confirm hall, stand number and dimensions at DWTC.
  2. Concept and 3D design — photorealistic visuals and a floor plan balancing product displays, meeting rooms and reception.
  3. Costing and approval — a fixed, fully itemised quotation covering structure, displays, power, AV and logistics.
  4. Venue approvals and technical drawings — structural and electrical submissions prepared for DWTC approval.
  5. Fabrication — walls, meeting rooms, display units, joinery and graphics built and quality-checked in our own workshop.
  6. Pre-build and QA — trial assembly with displays fitted, so fixings and finishes are proven before build-up.
  7. On-site installation — supervised build at DWTC during official build-up, handed over show-ready.
  8. Show-day support and dismantling — standby team on call, then careful dismantling and return or storage of your materials.

Stands for VitaShow, Parapharma and DUPHAT Tech

The different zones call for different stands. VitaShow and Parapharma exhibitors sell products that end up on a pharmacy shelf, so it helps to show them that way: retail-style shelving, good lighting on packs, and a display that a pharmacy-chain buyer can picture in their own stores. Strong colour and clear range architecture work well here.

DUPHAT Tech exhibitors bring manufacturing and packaging machinery, which needs power, sometimes compressed air, floor-loading checks and a safe viewing area. We work out the electrical load, order the supply through DWTC’s official electrical contractor, and schedule machine delivery into the build-up timetable. Startup-zone exhibitors usually need a compact, well-branded modular unit with a screen and a counter, ready quickly and at a sensible budget.

Planning around the conference and Business Hub

DUPHAT runs a scientific conference, workshops and poster presentations alongside the exhibition, together with the VITASHOW Dubai Nutrition Conference, the Pharma Leadership Forum, the Research Global Award and a Pharmacy Student Competition. Pharmacists and researchers move between sessions and the hall, so traffic tends to come in waves around the programme. A stand that can switch between a busy front counter and quiet meetings inside handles those waves well.

If your company has meetings booked through the Pharma Business Hub, plan for them in the layout: a clear place to receive pre-booked visitors, a screen or printed schedule for the team, and meeting space that is free when those appointments arrive. If someone from your team is presenting at the conference, have a short summary and a named contact ready on the stand for the follow-up. We design these details into the plan from the first sketch, rather than adding them on site.

Booking lead times

For a custom stand at DWTC we recommend starting 8–14 weeks before the show, and earlier for a double-decker or a large pavilion, because the venue’s technical approval and permits come before any building starts. A modular stand with custom graphics needs less lead time. Send us your hall, stand size and show dates and we will set out a build timeline that fits them.

The steps are the same for every show. We agree the brief and budget, then send 3D concepts and a costed quote. Once the design is approved we prepare the structural drawings and submit them to the organiser and DWTC for approval. Fabrication runs in our workshop alongside that approval, so the stand is built and checked before move-in. On site we handle the build, power and furniture, stay on call through the open days, and take everything down and clear the space at the end.

Stand options and pricing

We build every DUPHAT format. Modular stands, from AED 950 per square metre, suit startups and smaller exhibitors who need clean branding, product shelving and a meeting point. Custom stands start from AED 1,650 per square metre and give you a bespoke layout with meeting rooms and product displays. Premium builds start from AED 2,400 per square metre, and double-decker and pavilion builds from AED 3,200 per square metre — useful when you need several meeting rooms without losing floor display.

The final figure depends on stand size, the number of meeting rooms, displays, AV and branding. Every quotation is fixed and itemised, so the price you approve is the price you pay.

Why pharma brands choose SOL Dubai

We are a Dubai-based exhibition stand builder with our own workshop in Al Quoz, working at DWTC as our home venue. We handle DUPHAT stands start to finish: design, fabrication, venue approvals and on-site installation. Clients get workshop-built quality, a single accountable team and a price that holds from quotation to final invoice.

Building at Dubai World Trade Centre: the rules that shape your DUPHAT 2027 stand

DUPHAT 2027 is governed by the Dubai World Trade Centre’s own technical regulations. Get them right and your stand goes up cleanly; miss a submission and you lose build time, not just money. We design to all of this from the first sketch and file the paperwork for you.

Permit to Build

Every stand needs a DWTC Stand Permit to Build (PTB) before construction. We prepare and submit it so your build is cleared to start on day one of build-up.

Height & “complex” structures

Standard custom builds work to around 4m. Taller builds and anything DWTC classes as complex — double-deckers, long spans, or stands where the travel distance to an exit exceeds 10m — trigger structural-engineer clearance through DWTC’s Organiser+ portal before the Permit to Build is released, and the engineer can halt an unsafe build on site.

Double-deckers

A two-storey stand needs certified structural calculations, a Double-Deck health-and-safety declaration, a displayed maximum-occupancy figure and code-compliant staircases — at least 1m wide with handrails, and a second staircase once an upper deck passes ~200 sqm or sits over 25m from the stairs.

Electrical power

All mains power is supplied by DWTC’s official Electrical Contractor and ordered in advance — you can’t self-wire mains. We design the scheme and order it, including 24-hour power where your stand needs it.

Rigging & suspended elements

Banners and lighting rigs hung from the hall are subject to DWTC approval and load limits and ordered ahead of tenancy. We prepare and file the rigging submission on time.

Fixings & fire-safe materials

Nothing may be fixed to the floors, walls, ceilings or structural steel, and all materials must be fire-retardant — Perspex is prohibited (Lexan and Macralon are accepted). We complete and inspect finishes in our workshop, so the on-site crew assembles an approved build.

Accreditation & deadlines

Every contractor needs a DWTC Contractor+ digital badge and PPE is mandatory. Structural, rigging and electrical submissions run weeks ahead of build-up, and late orders attract surcharges — we manage the badges and the deadlines.

Recent Builds

Recent builds from our workshop

Real stands designed and built by our in-house team. Every stand is pre-built and inspected before it ships to Dubai World Trade Centre.

SOL Dubai custom stand, built in our Dubai workshop
Custom stand · SOL Dubai
SOL Dubai island stand, built in our Dubai workshop
Island stand · SOL Dubai
SOL Dubai double-decker, built in our Dubai workshop
Double-decker · SOL Dubai
SOL Dubai feature-lit, built in our Dubai workshop
Feature-lit · SOL Dubai
SOL Dubai bespoke build, built in our Dubai workshop
Bespoke build · SOL Dubai
SOL Dubai country pavilion, built in our Dubai workshop
Country pavilion · SOL Dubai
View our full portfolio
Transparent Pricing

DUPHAT 2027 stand pricing — all-inclusive

One quote covers design, in-house build, graphics, delivery, install, dismantle and venue paperwork — fixed and itemised, with a free 3D concept before you commit.

Modular
9–18 sqm
From
AED 950 / sqm
Best for: first-time and value-focused exhibitors
  • Reusable system structure
  • Custom-printed graphics
  • LED lighting & furniture
  • Delivery, install & dismantle
  • Venue paperwork handled
Get a quote
Premium
50–100 sqm
From
AED 2,400 / sqm
Best for: large, high-impact stands with demo space
  • Everything in Custom, plus:
  • Large-scale custom build
  • Double-height feature elements
  • Full AV & feature lighting
  • Demo / hospitality area
  • Priority in-house build slot
Get a quote
Double-Decker / Pavilion
100+ sqm
From
AED 3,200 / sqm
Best for: flagship presence and country pavilions
  • Everything in Premium, plus:
  • Two-storey engineered build
  • VIP lounge & meeting rooms
  • Certified structural sign-off
  • Country-pavilion capable to 1,500 sqm
Get a quote

Not included: venue space rental (paid to the organiser), and venue electrical & rigging orders (we place these at the advance rate on your behalf and bill at cost). Bespoke add-ons are quoted line by line, so the number you sign is the number you pay.

Case Studies

Real briefs. Real results.

See how brands turn raw floor space into a working show presence — every project handed over to a documented client sign-off.

Explore all case studies →
Field Notes

Build notes for Dubai World Trade Centre

The detail that isn’t in the exhibitor manual — from the people who build here.

CD
Carlos Dalè
General Manager, SOL Dubai · oversees stand design and build to venue rules across Dubai, Abu Dhabi and Riyadh
01

Permit to Build gates everything — file the structural calcs early

At DWTC nothing gets built without a Permit to Build, and for any complex or double-deck stand that permit depends on structural calculations clearing the DWTC engineer. We submit on Organiser+ the week the design is signed off — a late structural file, not the build, is what most often delays a stand.

02

Mains power is DWTC’s to supply — order it, don’t wire it

All mains electrical comes from DWTC’s official contractor and is ordered in advance. We book power — including 24-hour supply where a stand needs it — at the advance rate so nothing is sitting dead on opening morning.

03

Finish in the workshop — Perspex won’t pass

Only fire-retardant materials are allowed and Perspex is specifically prohibited (we use Lexan or Macralon). We complete and inspect every finish at our workshop, so the on-site crew assembles an approved build instead of fabricating in the hall.

04

Lock the slot early

DWTC’s calendar is packed, so build-up slots, rigging and power book out and late orders cost more. We secure your space-only window and order services at the advance rate.

Common mistakes, in order of frequency

  1. An oversized logo on the back wall that crowds out the one-line proposition a buyer reads in three seconds.
  2. The same graphic on the front and side panels of an inline stand — the aisle-facing side panel is your most wasted surface.
  3. A counter or sign at the very front that blocks the sightline into the stand and stops buyers stepping in.
  4. Under-ordering power — no 24-hour supply for fridges, screens or live demos, so the stand isn’t ready on opening morning.
  5. Leaving structural, rigging and electrical orders until after the venue deadlines and paying avoidable surcharges.
FAQ

DUPHAT 2027 stand questions, answered

Real answers with real numbers — including the venue’s build rules. Click any question to expand.

When and where is DUPHAT 2027?
DUPHAT 2027, the 32nd edition, takes place from 30 March to 1 April 2027 at the Dubai World Trade Centre (DWTC), organised by INDEX Conferences & Exhibitions.
How big is DUPHAT?
According to the organiser and WAM, the 2026 edition had more than 1,100 exhibiting pharma brands and companies and more than 25,000 visitors and participants from 85 countries. It closed with approximately AED 10.3 billion in direct and indirect deals.
What are the exhibition zones at DUPHAT?
Pharma for global pharmaceutical brands, VitaShow for vitamins, supplements and nutraceuticals, DUPHAT Tech for manufacturing machinery, Parapharma for OTC and wellness products, and a Startup zone.
How much does a DUPHAT stand cost?
A full-service DUPHAT stand starts from AED 950/sqm for a modular build, AED 1,650/sqm for a bespoke custom stand, AED 2,400/sqm for large premium builds and AED 3,200/sqm for double-decker and pavilion builds. Prices are approximate starting points; every quote is fixed and itemised with a free 3D concept.
How far ahead should we book a stand for DUPHAT?
We recommend starting 8–14 weeks before the show for a custom stand, and earlier for a double-decker or pavilion, because the venue’s structural approval and permits come first. A modular stand with custom graphics needs less lead time. Send us your hall and stand size and we will set out a timeline that fits your dates.
Can you build private meeting rooms on the stand?
Yes. We build closed or semi-closed meeting rooms with seating for four to six, a presentation screen and storage, using frosted glass or solid walls depending on how much privacy you need.
Who checks the claims on our stand graphics?
Your regulatory or medical team should approve all product wording. We build that sign-off step into the schedule and print only approved artwork.
Can you show manufacturing machinery in DUPHAT Tech?
Yes. We plan power and any compressed air, check floor-loading limits, schedule machine delivery into build-up and design a safe viewing area around moving parts.
Who handles the Dubai World Trade Centre permits and approvals?
We do, start to finish. Every stand at DWTC needs a Stand Permit to Build, and complex or double-deck stands need structural calculations cleared by the DWTC engineer first. We prepare the drawings, submit them and manage the approval.
How is power ordered for the stand?
Mains power at DWTC is supplied by the venue’s official electrical contractor and ordered in advance. We work out the load for your lighting, screens and any machinery and place the order at the advance rate.
Do you build double-decker stands at DUPHAT?
Yes. A two-storey stand adds an upstairs floor for meeting rooms above an open product area. It needs certified structural calculations, a displayed maximum-occupancy figure and code-compliant staircases. We engineer, certify and build it in-house.
What’s included in a full-service DUPHAT stand?
Custom 3D design, in-house fabrication and pre-build, full graphics, delivery to Dubai World Trade Centre, install and dismantle, the DWTC Permit to Build and H&S paperwork, electrical and rigging ordered on your behalf, and a dedicated project manager. Venue space rental is paid to the organiser and is not included.
Do you provide on-site support during DUPHAT?
Yes. Our team is on call across all three show days for anything from a graphic touch-up to an electrical fix, and larger stands get a dedicated on-site project lead.
What happens to the stand after the show?
We dismantle and clear the space, return your samples or hand them to your logistics agent, and can store reusable stand elements for your next edition so you are not paying to rebuild from scratch.
More Shows

More healthcare shows we build for

Other shows our in-house team designs and builds for, with the same full-service service and full venue handling.

See the full show calendar

Get your DUPHAT 2027 stand quote in 48 hours

Custom 3D rendering and all-inclusive pricing, designed to Dubai World Trade Centre’s rules with structural sign-off built into the timeline. We build in-house and install on site — the stand you approve in the rendering is the stand that opens.

Request a free quote
Live now