IDEX & NAVDEX 2027 at a glance
IDEX, the International Defence Exhibition & Conference, and NAVDEX, the Naval Defence & Maritime Security Exhibition, are held together every two years in Abu Dhabi. They are organised by ADNEC Group in association with the UAE Ministry of Defence and the Tawazun Council, with EDGE Group as strategic partner. The 2027 edition runs for five days, 25–29 January 2027, at ADNEC Centre Abu Dhabi. The official site lists opening hours of 9am to 5pm.
The 2025 edition, held 17–21 February 2025, had 1,565 exhibitors from 65 countries, up 16% on the previous edition, with 41 national pavilions and 206,073 visitors across 181,501 square metres of exhibition space. Deals worth AED 25.15 billion were announced during the show. NAVDEX used ADNEC Marina and Zayed Port, with naval fleets from eight nations on display. After the 2025 show, organisers said 70% of the exhibition space for 2027 had already been pre-booked.
Note the dates. An early announcement in 2025 gave 21–25 January 2027; the official site now lists 25–29 January 2027, and that is the edition this page plans for. We always confirm the build-up window with the organiser’s exhibitor manual before we lock a schedule.
Who comes to IDEX and what your stand must do
IDEX is a show for senior military officials, government decision-makers, procurement authorities and defence industry leaders. Official delegations tour the halls, and a delegation may stop at your stand for only a few minutes. Many of the most important conversations are booked weeks in advance and happen behind closed doors. That makes IDEX different from a typical trade show: the stand has to impress a delegation in the minute it stands at the front, and then give the right people somewhere private to talk.
In practice that means a strong, uncluttered front with your main system or product, a short and clear statement of capability, and a reception point where a host can greet a delegation and guide it in. Behind or above that, closed meeting rooms with doors, proper seating, a screen and controlled access. Defence companies often need more meeting rooms than they first think, and rooms that are booked back to back all week need storage, a small pantry and a way for staff to move between them without crossing the public area.
Displaying systems, vehicles and models
Defence exhibits range from small electronics and optics to vehicles, weapon systems, unmanned systems and large scale models of ships or aircraft. Each brings its own build questions. Heavy exhibits need display bases framed for the load, a check against ADNEC’s floor-loading limits and a delivery slot in the build-up timetable, because large items usually have to be placed before the stand walls go up around them. Display platforms of 600mm or more count as complex structures at ADNEC and need engineer-stamped calculations.
Smaller technology is easier to move but harder to show. Sensors, communications and software products need screens, live demonstration stations and seating so a visitor can see the system working rather than read a panel about it. We plan lighting around each exhibit, add protective barriers or plinth edges where an item must not be touched, and leave clear space around anything a delegation will want to walk around. The organiser sets the rules on what can be displayed and how; we design within them and include them in the approval submissions.
NAVDEX exhibitors
NAVDEX brings the naval and maritime security side of the show, and in 2025 it used ADNEC Marina and Zayed Port for vessel displays. Companies showing a vessel on the water still need a base inside the halls or a place to host visitors: somewhere to hold meetings, show the systems on board on screen and give delegations a reason to come and see the ship itself. We build that land-side presence, from a compact stand with a meeting room to a larger custom space with hospitality.
Shipyards and naval systems suppliers often also show scale models. Long, delicate models need cases or plinths built to their exact dimensions, with lighting that shows the detail and enough height in the stand design that they read from the aisle.
Our IDEX & NAVDEX stand build process
Every Abu Dhabi project runs through our eight-stage process, handled in-house:
- Discovery and brief — we list your exhibits, their sizes and weights, meeting-room needs, delegation hosting and budget, and confirm hall, stand number and dimensions at ADNEC.
- Concept and 3D design — photorealistic visuals and a floor plan balancing an open display front with private meeting space.
- Costing and approval — a fixed, itemised quotation covering structure, exhibit bases, power, AV and transport from Dubai.
- Venue approvals and technical drawings — structural, electrical and rigging submissions prepared to ADNEC’s rules, the Abu Dhabi construction-safety code and OSHAD.
- Fabrication — walls, meeting rooms, joinery and graphics built and quality-checked in our own workshop in Al Quoz.
- Pre-build and QA — trial assembly with doors, AV and lighting tested before the stand leaves the workshop.
- On-site installation — supervised build at ADNEC during the official build-up, coordinated with the delivery of your exhibits.
- Show-day support and dismantling — standby team on call for all five days, then careful dismantling and return or storage.
Building at ADNEC for IDEX
ADNEC runs its own technical framework, separate from Dubai’s. Stands follow ADNEC’s rules and regulations, the Abu Dhabi Municipality construction-safety code and OSHAD, and Abu Dhabi Civil Defence inspects during build-up. Anything over 4m, any double-decker and any platform of 600mm or more is treated as a complex structure that needs engineer-stamped calculations before build. Most large IDEX stands fall into at least one of those categories, so we plan the structural file from the start.
IDEX fills the venue, and many exhibitors build large, heavy stands at the same time. Build-up access, lifting slots and the order in which exhibits arrive need planning weeks ahead. We finish all fabrication in our workshop so the on-site work is assembly, and we coordinate with your logistics agent so exhibits and stand arrive in the right order.
National pavilions and group stands
With 41 national pavilions in 2025, pavilion work is a large part of IDEX. A national pavilion has to present a country’s defence industry as one, while giving each company its own space, signage and meeting point. We design the shared front, reception, hospitality and meeting rooms together with the individual pods, and run one approval package for the whole build. Our country pavilion design service is built for this kind of project.
Booking lead times
For a custom stand at ADNEC we recommend starting 8–14 weeks before the show, and earlier for a double-decker or a large pavilion, because the venue’s technical approval and permits come before any building starts. A modular stand with custom graphics needs less lead time. Send us your hall, stand size and show dates and we will set out a build timeline that fits them.
The steps are the same for every show. We agree the brief and budget, then send 3D concepts and a costed quote. Once the design is approved we prepare the structural drawings and submit them to the organiser and ADNEC for approval. Fabrication runs in our workshop alongside that approval, so the stand is built and checked before move-in. On site we handle the build, power and furniture, stay on call through the open days, and take everything down and clear the space at the end.
Stand options and pricing
We build every IDEX format. Modular packages with custom graphics start from AED 950 per square metre and suit smaller companies that need branding, a display and a meeting point. Custom stands start from AED 1,650 per square metre, with a bespoke layout, exhibit bases and closed meeting rooms. Large premium builds start from AED 2,400 per square metre, and double-decker stands and pavilions from AED 3,200 per square metre, adding an upper floor for private meetings and hospitality.
All prices are approximate starting points. The final figure depends on size, structure, the number of meeting rooms, exhibit handling and AV. Every quotation is fixed and itemised, and venue space is paid to the organiser and not included. As a Dubai-based builder with our own workshop in Al Quoz and regular work at ADNEC, we handle design, fabrication, approvals, transport to Abu Dhabi, installation and on-site support as one team.








