Do you build stands in Abu Dhabi as well as Dubai?

Yes. While we are a Dubai-based exhibition stand builder, we design and build across the UAE, including at ADNEC Centre Abu Dhabi where the Paper & Tissue Show is held. Our design studio and fabrication workshop serve both emirates, so a single accountable team handles your stand start to finish — concept and 3D design, in-house build, the ADNEC approval submissions, transport to Abu Dhabi and on-site installation. You avoid the common headache of appointing and coordinating a separate Abu Dhabi contractor. ADNEC's venue requirements and logistics differ from Dubai's, particularly for heavy machinery, and we manage those differences for you so the build runs just as smoothly as a Dubai one.

How much does a Paper & Tissue Show stand cost?

Custom Paper & Tissue Show stand design and build with SOL Dubai starts from AED 1,650 per square metre. Because this is an industrial, machinery-led show, the final figure is shaped by the weight and power needs of any equipment you stage — engineered bases, reinforced flooring and load sign-off factor in — along with the size of your space, single-storey or double-decker structure, AV and branding. We provide a fixed, fully itemised quotation once we understand your machinery and objectives. Because we design and build in-house and manage the Abu Dhabi logistics ourselves, the figure you approve is the figure you pay, with no hidden mark-ups for the cross-emirate build.

Can you build sustainable, reusable stands for this show?

Yes, and at a show where recycling and sustainability are central themes — with a co-located Recycle & Packaging Show — it often makes real sense. Where the brief allows, we build with reusable modular and custom structures, use energy-efficient LED lighting, and choose finishes that reinforce your environmental message rather than undercutting it. A reusable build can be re-skinned and reconfigured for future editions or other shows, supporting both your budget and the sustainability story your brand is there to tell. We will advise honestly on where reusable construction genuinely helps and where a fully custom build better serves your objectives, so the choice is informed.

How tall can my Paper & Tissue Show 2027 (Abu Dhabi) stand be, and do I need structural approval?

ADNEC treats anything over 4m, double-decker, or with a platform of 600mm or more as a complex structure needing engineer-stamped structural calculations and approval before build. We handle the full submission under ADNEC’s rules and the Abu Dhabi construction-safety code.

Who handles the ADNEC Centre Abu Dhabi permits and approvals?

We do, start to finish — ADNEC’s technical approval under the Abu Dhabi construction-safety code and OSHAD, with Civil Defence inspection handled on site. You don’t deal with the venue’s technical desk.

Can I get power and 24-hour supply for my stand?

Mains power is supplied through the venue’s appointed electrical contractor and ordered ahead. We design the lighting and power scheme and order it for you, including 24-hour supply where your stand needs it.

Can I hang a banner or lighting rig above my stand?

Yes, but suspended rigging is subject to venue approval and load limits and must be ordered ahead of tenancy. We design within the limits and file the rigging order on time so it’s approved without a last-minute surcharge.

How much does a Paper & Tissue Show 2027 (Abu Dhabi) stand cost?

A full-service Paper & Tissue Show 2027 (Abu Dhabi) stand starts from AED 950/sqm for a modular build, AED 1,650/sqm for a bespoke custom stand, and AED 2,400/sqm and up for large or double-decker builds. Every quote is fixed and all-inclusive with a free 3D concept.

When is Paper & Tissue Show 2027 (Abu Dhabi) and how early should I book?

Paper & Tissue Show 2027 (Abu Dhabi) returns in 2027 (exact dates to be confirmed). Because the best stand positions and production slots go early, we recommend starting 8–14 weeks ahead — earlier for a large or double-decker build.

What’s included in a full-service Paper & Tissue Show 2027 (Abu Dhabi) stand?

Everything to get you show-ready on one quote: custom 3D design, in-house fabrication and pre-build approval, full graphics, delivery to ADNEC Centre Abu Dhabi, install and dismantle, ADNEC approvals and OSHAD paperwork, electrical and rigging ordered on your behalf, and a dedicated project manager.

Do you build double-decker stands at ADNEC Centre Abu Dhabi?

Yes — double-deckers are a specialism. A two-storey stand roughly adds 1.5 times your usable space with an upstairs lounge or meeting floor, and needs certified structural calculations, a displayed maximum-occupancy figure and code-compliant staircases (engineer-stamped calculations under the Abu Dhabi construction-safety code). We engineer, certify and build it in-house.

Do you provide on-site support during Paper & Tissue Show 2027 (Abu Dhabi)?

Yes. Our team is on call across all show days for anything from a graphic touch-up to an electrical or AV fix, and larger stands get a dedicated on-site project lead.

What happens to the stand after Paper & Tissue Show 2027 (Abu Dhabi)?

We dismantle and clear the space, and can store reusable elements for your next edition and refresh the graphics — so you’re not paying to rebuild from scratch each year.

Paper Tissue Show Exhibition Stand Builders

Paper & Tissue Show 2027 at a glance

The Paper & Tissue Show (also known as the Paper & Tissue One Show) is the MENA region's leading trade fair for the pulp, paper, tissue, hygiene and packaging industries, organised by Al Furat Group at ADNEC Centre Abu Dhabi. The 2026 edition — the 11th — ran 31 March to 2 April with more than 400 exhibitors and 16,000-plus visitors from over 120 countries. The 2027 edition is expected to follow the same annual cadence at ADNEC, with exact dates confirmed by the organiser closer to the event.

The show is co-located with the Hygiene & Nonwoven Show and the Recycle & Packaging Show as a three-in-one platform during MENA Pulp Week, covering jumbo rolls, tissue converting machinery, packaging board, nonwoven hygiene products, raw materials, chemicals and recycling and sustainability solutions.

This is an Abu Dhabi show, not a Dubai one — a distinction that matters for logistics and venue approvals. SOL Dubai is a UAE exhibition stand builder that designs and builds at ADNEC Abu Dhabi as well as Dubai venues, so one team handles your stand wherever in the Emirates you exhibit.

What a Paper & Tissue Show stand has to do

This is an industrial sourcing show where buyers come to evaluate machinery, materials and converting solutions for real production lines. Many exhibitors stage running equipment, and decisions are made through detailed technical conversations. A stand has to present often heavy product and machinery clearly, and give serious buyers comfortable space to work through specifications.

Presence still matters in a hall of 400-plus exhibitors, so a strong, professional, well-lit stand signals a serious supplier. The best Paper & Tissue Show stands combine clear technical product and machinery staging with meeting space sized for the long, project-led conversations that drive industrial sales.

Our Paper & Tissue Show stand build process

Every project runs through our disciplined eight-stage process, coordinated for an Abu Dhabi build at ADNEC:

Discovery and brief — we map your product and machinery, its weight and power needs, demonstration and meeting requirements and budget, and confirm hall, stand number and dimensions at ADNEC.
Concept and 3D design — photorealistic visuals and a floor plan balancing machinery and product staging, branding and meeting space.
Costing and approval — a fixed, fully itemised quotation with no hidden extras.
Venue approvals and technical drawings — structural, electrical and heavy-load submissions prepared for ADNEC Abu Dhabi approval.
Fabrication in our Dubai workshop — structure, engineered bases, joinery and branding built and quality-checked in-house.
Pre-build and QA — trial assembly, graphics fitting and electrical testing before transport to Abu Dhabi.
On-site installation — supervised build at ADNEC during official build-up, coordinated with machinery delivery, handed over show-ready.
Show-day support and dismantling — standby team on call, then clean dismantling and clearance.

Materials and construction

Industrial paper and tissue stands put engineering first. We build load-bearing bases and reinforced flooring for heavy machinery and product, with correctly rated power and cable management designed in. Structural elements use engineered aluminium and steel where height or double-decker space is needed.

Branding is delivered through timber-framed custom walls, tension-fabric and acrylic lightboxes and illuminated 3D logos for a professional, industrial-quality finish. Raised platform flooring conceals power and cable runs, and durable laminate and solid-surface finishes give the stand the robust, credible feel industrial buyers expect.

Paper, tissue and packaging stand requirements

Paper and tissue exhibitors carry demanding needs: heavy machinery and product requiring engineered bases and load sign-off; live equipment needing reliable power; clear technical staging so converting lines and materials are understandable; and substantial meeting space for the detailed, project-led conversations industrial buyers run on. With sustainability central to the sector, a credible, considered build also reinforces an exhibitor's environmental message.

We design for all of it — engineered staging for heavy product, dedicated power, clear technical display and comfortable meeting areas — and we manage the ADNEC approval and Abu Dhabi logistics, which differ from Dubai venues. Where the brief calls for it, we build reusable structures that support both budget and sustainability across future editions.

Stand options and pricing

We build every Paper & Tissue Show format. Upgraded shell-scheme packages suit smaller exhibitors needing clean branding, product display and a meeting point. Custom single-storey stands give you a bespoke layout with engineered machinery and product staging, demonstration space and meeting areas. Double-decker stands let major manufacturers and pavilions add an upstairs meeting or hospitality floor above an open ground-floor showcase.

Custom Paper & Tissue Show stand design and build starts from AED 1,650 per square metre, with the final figure shaped by the weight and power needs of your machinery and product, size, structure, AV and branding. Every quotation is fixed and itemised, and full-service delivery gives you one accountable team handling design, build and the Abu Dhabi logistics from concept through dismantling.

Why exhibitors choose SOL Dubai for the Paper & Tissue Show

We are a UAE exhibition stand builder with our own design studio and workshop, building at ADNEC Abu Dhabi as well as Dubai venues. That means a single team handles your stand start to finish — design, in-house fabrication, the ADNEC approval process and Abu Dhabi logistics — rather than you appointing a separate Abu Dhabi contractor.

Clients get in-house build quality, a single accountable team, sustainability-aligned reusable build options, and a price that holds from quotation to final invoice. For paper, tissue and packaging brands exhibiting at the region's leading industry event, that local knowledge and full-service control keep a machinery-led Abu Dhabi build predictable and on budget.